LN-101
Required for downloading software to CM-100 & CM-700 control modules.

User Manual >>

USB2Dynamixel
Uesful tool for:
- converting USB to Serial,
- talking via USB port directly to AX, DX, EX, MX and RX Dynamixels.

User Manual >>

Serial Cable BSC-10
Serial Cable as supplied in Bioloid kits, compatiable with CM2+, CM-5 and CM-510 control modules.

Zig100 Set
Add wireless comms to your CM2+, CM5 or RC-100.

If you need PC to CM comms then you'll also need the Zig2Serial pcb shown below.

ZigBee User Manual >>

Zig100-RC Set
This set comes with a Zig100 Set and an RC-100. This allows the remote control to communicate wirlessly with a CM2+ or a CM5.

ZigBee User Manual >>
R/C User Manual >>

Zig110 Set
Add wireless comms to your CM510.

If you need PC to CM comms then you'll also need the Zig2Serial pcb shown below.

ZigBee User Manual >>

Zig110-RC Set
Used with a ZIG100 module this boards add wireless comms to your Bioloid from a PC's COMM Port.

ZigBee User Manual >>
R/C User Manual >>

Zig2Serial
Used with a ZIG100 module this boards add wireless comms to your Bioloid from a PC's COMM Port.

Zig2Serial User Manual >>

RC-100 Remote Control
Add wireless comms to your CM2+ & CM5. This module is based around the Chipcon 802.15.4 chipset. If you need PC to CM comms then you'll also need the Zig2Serial pcb shown below.

R/C User Manual >>